Electrocompaniet ECI5 MKII Amplificateur Intégré 2x 120W RMS / Noir 
L'ECI 5 MK II est l'amplificateur intégré symétrique de tous les superlatifs. Avec ses 2x 120W RMS sous 8 Ohms il saura combler tous vos désirs.4'800.00 CHF
|
The new ECI-5 MK II has a more powerful output stage compared to the existing ECI-5. Twice the number of outputdevices have been utilised to improved bass control and stability when driving heavy loads.
To improve current, bank of reservoir capacitors is increased to 80000 micro farad which is fed by a powerful 500Va transformer. With these power resources the ECI-5 becomes capable of reproducing the most dynamic recordings.
ECI-5 MK II also has a new and improved overload detection system that allows us to remove the output relay.
Hence the output stage is connected directly to the speaker with no relay controls in the signal path that deteriorates over time.
All input switching is handled by high-end analogue switches with virtually no distortion and a life time of trouble free operation.
The input stage is built from discrete circuits running in class A with no feedback. The output stage runs with moderate amounts of negative feedback, carefully balanced between good bass extension and control, a detailed open midrange and a warm detailed top.
The ECI-5 MK II has a FTT power supply that makes it a very powerful 2 x 120 Watts amplifier – capable of running large speakers. Like all other products from Electrocompaniet it has a fully balanced design. It has a total of 6 inputs – 2 balanced, three single ended and one direct HomeTheatre input.
The ECI-5 MK has a new and larger display that improves readability – the display can be dimmed, very nice when you are listening to your favourite music at night.
All measurements are made at 120V / 240V //50Hz / 60Hz
Preamplifier section
Input impedance ( Balanced input ) 47Kohm
Maximum input level 10 Volt RMS
Noise floor ( 1Vrms, 20 - 20 kHz, balanced) -135 dB
THD + N (1Vrms, 20 - 20 kHz, balanced) <0.003%
Gain (Balanced) 0 dB
Amplifier section
Output Impedance < 0,02 Ohm
Frequency response 1 – 150 kHz
Channel separation > 120 dB
THD ( 20 - 20 kHz) < 0.004%
Maximum peak current >100A
Damping factor 8 ohm load >350
I Input sensitivity 120W output 1.3Vrms
Input sensitivity HT 120W output 1Vrms
Rated output power
8 ohms 2 x 120 W
4 ohms 2 x 200 W
2 ohms 2 x 370 W
Power consumption 100 W
(no load or signal)
Standby 1W
Dimensions
Width 483 mm
Depth 405 mm
Height 135 mm
Weight 20Kg
» Télécharger la fiche technique
» Lien vers le site officiel