Audio Alchemy DPA-1M - MONO Verstärker 1 x 400 Watts

Demo im neu Zustand mit 12 Monate Garantie! -  2 Stück verfügbar.
Audio Alchemy DPA-1 ist das Resultat der glücklichen Kombination von den besten analogen und digitalen Technologien. Er kombiniert die Musikalität der traditionellen Schaltungen in der Klasse A oder AB mit der Leistung und Effizienz der modernsten Klasse D Schaltungen. Peter Madnick und sein Team von Ingenieuren haben es geschafft einen fantastischen Verstärkers mit 400 Watt in einem Chassis das nur 27 cm breit ist zu gestalten!

Am lager - Porto gratis
1'598.00 CHF (La pièce) (Neupreis: 2'598.00 CHF)
eine Demo reservieren

Eine Demo reservieren


Ich habe noch kein Konto

Ich habe ein Konto

Monoblock Hybrid Digital Power Amplfier

The DPA-1M Digital Power Amplifier doubles up on the DPA-1's almost magical combination of power, musicality and efficiency. Even though it's just 10.5 inches wide, the DPA-1M conjures up an incredible 325 watts per channel into 8 ohms,. Because it's a monoblock, power is doubled and the left and right channels can hit full output and maximum dynamics without impacting the performance of the other channel. Hearing this tiny, cool-running amp produce such incredible dynamics is almost as dazzling watching a wizard change a rabbit into a horse. But it's not magic, just a masterful combination of a Class A analog input stage with a high-efficiency Class D output stage.

Analog Class A Input Stage

The input stage is the same essential circuit used in many of the world’s best and most expensive amplifiers: a Class A design built using discrete FETs and powered by a semi-toroidal transformer. Because it's pure analog all the way through, with no integrated circuits in the signal path, it provides the output stage with an ultra-clean signal and preserves every last tiny detail in the music.

Effortless, Efficient Power

How does the DPA-1M deliver so much power from such a tiny chassis? The secret behind this magic is a Class D output stage, which runs about 80% efficiency, compared to about 30% for a typical Class AB amp, and idles at about 20 watts rather than the 100 watts many Class AB designs consume. Because the DPA-1M's output stage produces so little heat, it doesn't require large heat sinks, a large chassis, or anything more than just minimal ventilation. Thus, it operates flawlessly whether it's out on the floor on an amp stand, or tucked away in an equipment cabinet or closet.

Key Features
·      325 WPC into 8Ω, 400 WPC into 4Ω
·      Class A discrete FET input stage
·      Cool-running Class D output stage
·      XLR and RCA inputs
·      Switchable gain and mute

Audio Alchemy DPA-1 Specifications:
Power output/channel (0.1% THD+N, 1 kHz)
325 watts into 8Ω
400 watts into 4Ω

Frequency response
+/-0.25 dB, 20 Hz to 20 kHz

Nominal THD+N (1 watt into 8Ω)

Signal-to-noise ratio (1 kHz)
100 dB unweighted

Input impedance
100 kΩ

Output impedance
0.06 Ω

Channel separation (1 kHz)
-80 dB

20 or 26 dB switchable

XLR, RCA, IEC power, 3.5mm trigger

5-way binding posts (two sets)

Available finishes

76 x 267 x 295 mm (hwd)

7.3 kg

Link zur offiziellen Website
Download Technisches Datenblatt
24/7 Kostenlos unsere Berater anrufen
0 800 800 660
24/7 Kostenlos unsere Berater anrufen 0 800 800 660