CH Precision D-1 - SACD und CD Transport

Der CH PRECISION D 1 besitzt alles um der ganzen Welt zu zeigen was die Schweitzer Technologie vom allerbestem kann. Dank seinen 3 Einschubs Plätzen, für optionale Karten, erlaubt er eine fantastische Modularität. Alle fantastischen CH PRECISION Musik Instrumente werden in der +Schweiz+ entwickelt und gebaut.

Am lager
32'900.00 CHF
eine Demo reservieren

Eine Demo reservieren

x

Ich habe noch kein Konto

Ich habe ein Konto

CH Precision's D1 Reference grade SACD&CD unit exemplifies state-of-the-art Swiss precision and utmost dedication to faithful musical reproduction. 
Built around the Esoteric VMK-5 VRDS SACD&CD pick-up mechanism, the D1 offers a fully modular and evolutive architecture based on optional slot-in boards for its audio outputs. Almost any configuration ranging from a simple stereo analog only player to a multi-channel purely digital drive is allowed.
The user interface is based on an ergonomically designed dual concentric rotatory knob with push function and feedback is given by a color-programmable high-definition AMOLED display. A custom infrared remote control allows access to the D1's most common functions.

Option boards:
Digital_Out: Stereo digital output board à CHF 2'250.-
Four digital outputs - CH Link, AES/EBU, S/PDIF and Toslink - are provided on a single board.
Up to three boards can be used into the unit to allow multichannel SACD reproduction with three separate D/A converters.
Factory fitted (1x).

Analog_Out: Stereo analog output board à CHF 2'250.-
Up to three boards can be used into the unit to allow multichannel SACD reproduction.
Can be ordered with the following backpanels:
- Left / Right
- Left surround / Right surround
- Center / Sub

Analog_Out_M: Monaural analog output board à CHF 4'500.-
Turns the D1 drive into a reference stereo player.
Sold only by pair, for Left and Right front channels.

SYNC_I/0: Clock synchronization board à CHF 1'300.- Picture
Allows unit synchronization as clock slave. Audio frequencies as well as atomic clock frequencies are supported. A clock master mode is also provided to synchronize external units.

Caractéristiques techniques CH PRECISION D1:
Reading mechanism:
Reference: Teac VMK-5 VRDS-NEO reading mechanism
Supported medias: CD, CD-R/RW
SACD single layer, dual layers and hybrid

Digital outputs:
CH Link: High Definition Link
PCM 16bit/44.1kHz 
DSD 1bit/2.8224MHz, cyphered
AES/EBU: XLR connector, 2.5Vpp, 110Ω, PCM 16bit/44.1kHz
S/PDIF: RCA connector, 0.5Vpp, 75Ω, PCM 16bit/44.1kHz
Toslink: Optical connector, PCM 16bit/44.1kHz

Analog outputs, monaural D/A boards:
D/A conversion: 1x WM8742 per channel
Digital filter: User selectable via front panel user interface
Frequency response: DC - 20kHz for CD reproduction
DC - 50kHz for SACD reproduction
Output stage: Discrete fully differential output stage
All analog stages have a zero global negative feedback
Outputs type: Balanced (XLR), one connector per board
Single-Ended (RCA & BNC), one connector per board
Output level: 4V RMS @ 0dBFS in balanced mode
Dynamic range: >96dB for CD
>120dB for SACD
Signal to Noise Ratio: Better than 120dB for both CD and SACD
Total Harmonic Distortion + Noise: Less than 0.002% for CD
Less than 0.0015% for SACD

Analog outputs, stereo D/A board:
D/A conversion 1x WM8742 per channel
Digital filter: User selectable via front panel user interface
Frequency response: DC - 20kHz for CD reproduction
DC - 50kHz for SACD reproduction
Output stage: Discrete differential output stage
All analog stages have a zero global negative feedback
Outputs type: Balanced (XLR), one pair
Single-Ended (RCA), one pair
Output level: 2V RMS @ 0dBFS in impedance-balanced mode
2V RMS @ 0dBFS in single-ended mode
Dynamic range: >96dB for CD
>120dB for SACD
Signal to Noise Ratio: Better than 120dB for both CD and SACD
Total Harmonic Distortion + Noise: Less than 0.002% for CD
Less than 0.0015% for SACD

Synchronization:
Clock input: BNC, 0.5Vpp to 5Vpp
75Ω or Hi-Z
44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
22.5792MHz, 24.576MHz
100kHz, 10MHz
Clock output: 2x BNC, 2Vpp, 75Ω
input sampling frequency or input clock if externally synchronized

General:
Display: 480x272 pixels, 24bits color, AMOLED
Mains operation: Selectable 100V, 115, 230V AC, 47-63Hz
Power supply consumption: <1W (standby), 40W average in operation
Dimensions/Weight: 440 x 440 x 120mm (W x D x H), 32kg
Remote control: IR Remote control provided, RC5 codes
Ethernet interface, TCP/IP control

Link zur offiziellen Website
24/7 Kostenlos unsere Berater anrufen
0 800 800 660
24/7 Kostenlos unsere Berater anrufen 0 800 800 660