Developed from Linn’s latest Chakra power amplifier topology, Majik power amplifiers are ideal for use in stereo or multi-channel systems. Chakra is a simple but highly innovative design perfected by Linn through precision engineering. It offers significantly increased power, reliability and efficiency, whilst at the same time producing less heat, less distortion and using fewer components.
Eine Demo reservieren
Eine Demo reservieren
Ich habe noch kein Konto
Ich habe ein Konto
Beschreibung
Majik power amplifiers also feature Linn Dynamik Switch Mode Power Supply (SMPS) technology which generates stable, low noise power rails for the audio circuitry, with higher mains noise isolation and efficiency than bulky, noisy conventional power supplies.
To ensure a solid electrical contact between your power amplifier and loudspeakers, Majik power amplifiers use high quality 4mm binding post connections to eliminate any movement in the cable which could adversely affect audio performance.
Majik power amplifiers can be upgraded by the addition of internal Aktiv crossover cards. This makes it simple to improve the performance of your playback system by upgrading to an Aktiv configuration with Linn loudspeakers.
The Majik range comprises the following models:
The 6100 - 6 voies, 6 x 100 W (4 Ohms) CHF 3'929.-
The 5100 - 5 voies, 5 x 100 W (4 Ohms) CHF 3'569.-
The 4100 - 4 voies, 4 x 100 W (4 Ohms) CHF 3'219.-
The 3100 - 3 voies, 3 x 100 W (4 Ohms) CHF 2'859.-
The 2100 - 2 voies, 2 x 100 W (4 Ohms) CHF 2'309.-
To ensure a solid electrical contact between your power amplifier and loudspeakers, Majik power amplifiers use high quality 4mm binding post connections to eliminate any movement in the cable which could adversely affect audio performance.
Majik power amplifiers can be upgraded by the addition of internal Aktiv crossover cards. This makes it simple to improve the performance of your playback system by upgrading to an Aktiv configuration with Linn loudspeakers.
The Majik range comprises the following models:
The 6100 - 6 voies, 6 x 100 W (4 Ohms) CHF 3'929.-
The 5100 - 5 voies, 5 x 100 W (4 Ohms) CHF 3'569.-
The 4100 - 4 voies, 4 x 100 W (4 Ohms) CHF 3'219.-
The 3100 - 3 voies, 3 x 100 W (4 Ohms) CHF 2'859.-
The 2100 - 2 voies, 2 x 100 W (4 Ohms) CHF 2'309.-
Spezifizierungen
Spezifikationen
Anzahl der Kanäle : 2
Anzahl der Ausgangs Lautsprecher : 2
: 2 x 100 W RMS 4Ω ; 2 x 56 W rms 8Ω
Bridgeable : Nein
Verstärker Typ : Klasse K
Frequenzgang : 1.4 Hz - 41 kHz
Verzerrung (THD) : < 0.01%
Stromversorgung : 110V-120V / 220V-240V 50Hz/60Hz
Artige Spannungsversorgung : Schaltnetzteile
Optionale Module : Die Fähigkeit, Aktiv-Karten für schwangere LINN hinzufügen
Audio Anschlüsse
Cinch-Eingang : 2
XLR eingang : Nein
Cinch ausgang Pre out : 2
XLR Ausgang Pre out : Nein
Daten Anschlüsse
Trigger : Nein
Control bus : Nein
Die automatische Erkennung von Signal : Ja
Größe
Größe (HxBxT) : 80 x 381x 355 mm
Veredelung : Schwarz - Silber
Gewicht : 5.2 kg
Garantie : 5 Jahr
