Shunyata OMEGA-CLOCK-50 - 1m25

3'129.00 CHF pièce de 1m25
3'298.00 Sie sparen 169.00
The Shunyata Omega S/PDIF and Clock 50 cables elevate the performance of digital systems to a degree that competes with the world’s finest analog and master tape sources. Shunyata Research’s innovative and proprietary technologies reduce common-mode noise and cable-induced jitter with its associated time smear that ultimately limits the performance of digital playback. The Omega S/PDIF and Clock cables don’t just improve digital playback, they literally redefine digital audio as a reference medium.
PMZ
Shunyata Research digital cables are produced using a ‌Precision Matched Impedance cable geometry. This means that tolerances of the conductor surface, dielectric extrusion, and the precision of the braided shield are held to minute variances. To achieve these tight tolerances, the extrusion and braiding machines must be run at one-quarter speed during the manufacturing process. The result is better performance through a reduction of cable-induced signal jitter.

ArNi®
wire was designed by Shunyata Research to be the finest quality wire available. It begins with the highest purity of copper and silver metals available, including Ohno (single crystal), PCOCC silver and OFE C0101 conductors. Fluorocarbon dielectrics, usually only found in aerospace applications that have exceptional electrical characteristics including extremely low dielectric absorption, high dielectric strength and superb heat resistance.  When used in digital wiring it significantly reduces transient energy storage and release which affects phase noise performance.

CMODE
Common-node noise is different than differential noise and is much more difficult to measure and eliminate. For the purest signal possible, Shunyata Research has developed a CMODE filter that effectively reduces common-mode noise without introducing the sonic compression effects associated with conventional filters. It reduces high-frequency noise distortion while delivering an analog ease and palpable background silence that closes the gap between digital and analog systems.

PMZ Connectors
Pulse timing is critical to digital transmission accuracy.  It is critical that a digital connector’s impedance precisely match the cables's characteristic impedance.  A mismatched connector will create signal reflections which increases digital jitter or phase noise. A 50-ohm cable requires a 50-ohm termination — not the commonly used 75-ohm connector. Shunyata Research is careful to ensure that every cable and connector are precisely matched for a seamless component to component connection.

Kinetic Phase Inversion Processing
Kinetic Phase Inversion Processing was developed by Caelin Gabriel after years of research into the underlying causes of various effects such as burn-in, wire directionality and the effects of cryogenic treatment. He discovered that there was an underlying core principle that burn-in and cryogenics only partially addressed. Once the governing principle was understood it became possible to create a processor that reduces the need for long burn-in periods and eliminates the effects of cryogenic treatment. Four-days of continuous KPIP™ processing dramatically reduces the sonic ups and downs associated with burn-in, delivering a relaxed and natural presentation.

APPLICATIONS
For all video system that require CLOCK connectors of extraordinary quality.

It takes us fifteen days to get your cables to the length you need from Shunyata. Click on "Request Information" above to get an offer. It takes CHF 108.- by 0.25 meter extra and per unity to get the length you need.
Cable Type: PMZ Coaxial
Conductors: ArNi ® / Silver
Dielectric: Fluorocarbon PTFE
Connectors: BNC-50
Characteristic Impedance: 50 ohms
TAP/CMode Hybrid Modules: two
KPIP Processing: 4-days
Length: 1m25

Safety Assurance:
Continuity and polarity tests – by two technicians
HiPOT tests insulation breakdown @ 1,200 VAC
24/7 Kostenlos unsere Berater anrufen
0 800 800 660
24/7 Kostenlos unsere Berater anrufen 0 800 800 660