Electrocompaniet EC4.8-MK2

4'690.00 CHF
L'Electrocompaniet EC4.8 MK2 fabuleux pré-amplificateur dual-mono complètement classe-A et symétrique.
The new two-channel EC 4.8 preamplifier is sure to make all good power amplifiers sound even better !

The EC4.8 preamplifier is designed to fill our need for a advanced preamplifier in a higher price range. The preamplifier is designed as a slimline version, with a fully balanced electronic solution from input to output. It is designed as two separate mono preamplifiers, each with it’s own power supply. This preamplifier can be used with the included IR remote controller or as an option, together with the RF based remote controller ECT 2. The EC4.8 has the new SPAC network for safety control of the connected power amplifiers.

All measurements are made at 120V / 240V //50Hz / 60Hz
Input impedance balanced (fixed) 47 Kohm
Output impedance 100 ohm
Input level (Single ended) >15 Vp-p
Input level (balanced) >30 Vp-p
Max output level (Single ended) >15 Vp-p
Max output level (Balanced) 30 Vp-p
Gain - 111dB to +6dB
Noice Floor <-130dB (@ 0dB gain)
Frequency responce 0.5 - 200.000 Hz
Channel Seperation > 120dB
THD + N <0.002%
Power consumption (no load or signal) 30 W
Dimensions and Waight
Width 483 mm / 19 inch
Depth 386 mm / 16.1 inch
Height 76 mm / 4.5 inch
Weight 9 kg
Balanced 2 x2 channel
Single ended 3 x 2 channel
Control Ports
Nettwork 3 x SPAC
Programming 1 x USB
Balanced 1 x 2 channel
Single ended Record Out
Appelez 24/7 gratuitement
nos conseillers

0 800 800 660
Appelez 24/7 gratuitement
nos conseillers
0 800 800 660